2 × 3-Inch Sanding Drum Kit for Drill or Drill Press - SF06

A Sanding Drum for Curves and Inside Edges

Use the O'SKOOL SF06 sanding drum with a compatible drill or drill press to work on curves and inside edges. The 2 × 3-inch drum holds sheet sandpaper cut and folded to fit, giving you a way to replace the abrasive while keeping the drum.

Replace the Sandpaper

A tightening roller secures the paper. Follow the supplied cutting, folding and fitting instructions when replacing it. The listed recommended paper thickness is 0.6–0.8mm; thinner paper may not clamp securely.

Included in the SF06 Kit

• ✓One 2 × 3-inch sanding drum
• ✓One combination wrench
• ✓One piece of 120-grit sandpaper
• ✓Paper-replacement instructions

The drum has a plastic body with a TPR covering. Inspect the drum, paper and mounting before use, and follow the operating instructions for your drill or drill press.

SF06 or SF08?

SF06 is the sanding drum kit listed above. If you are looking for the version with an aluminum handle, see the SF08 Hand-Held Sanding Drum. Both list a 2 × 3-inch drum; the handle is a key difference between the two kits.

Common Questions

Does SF06 use sheet sandpaper or a replacement sleeve?

It uses sheet sandpaper cut and folded for the drum's tightening mechanism. Use the supplied fitting instructions when preparing replacement paper.

Which abrasive is supplied?

The kit includes one piece of 120-grit sandpaper. Choose replacement paper to suit the work and the drum's stated fitting requirements.

Explore related workshop tools or ask O'SKOOL about compatibility before ordering.