Router Table System with Micro Adjust Fence & Safety Switch

The Engineering Behind the Fence

The dual-bearing guide system supports fence adjustment. Check alignment and lock the fence following the setup instructions.

• The Micro Adjuster adds a second layer of precision:
• ✓1/4" total travel for the fine-adjustment range
• ✓0.05" per full turn for controlled coarse-fine movement
• ✓0.005" indicated movement per graduation; verify your setup before use

Start Safe. Stay Safe.

Follow the safety-switch and router instructions. Disconnect the equipment from power before bit changes or maintenance.

• Rated at 120V / 15A, the included safety switch provides:
• ✓Dual outlets — router and dust collector on one circuit
• ✓Auto-reset overload breaker
• ✓Disconnect power before bit changes or maintenance, following the manual.

Guided Fence Adjustment

The dual-bearing guide system supports fence adjustment. Check alignment and lock the fence following the setup instructions.

A Tabletop That Works as Hard as You Do.

The 32" × 24" tabletop uses low-friction laminate on both top and bottom surfaces — the top for smooth workpiece travel, the bottom for panel rigidity and moisture resistance. All T-tracks are bolted from underneath, so clamping pressure from accessories loads into the table structure, not against surface fasteners.

Included Accessories

The listed accessories include featherboards, stop blocks, a bit guard and jointing shims. A compatible router lift or insert plate and router motor are required separately.

✓ Router Table with Stand - 32" × 24" laminated top & steel stand with Adjustable Leveling Feet

✓ Micro-Adjust Router Fence System - Dual-bearing, micro adjuster, 17" live scale tape, 2.5" dust port, Jointing Shims (Accurate 1/16" fence offset),stop block

✓ Safety Switch - 120V / 15A, dual outlets, safety key

✓ Featherboards and Dust Port Accessories

✓ All Necessary Mounting Hardware and Tools

 

 

 

Q: What size router insert plates fit this router table?

The table accepts insert plates measuring 11-3/4" × 9-1/4" × 3/8" thick with 3/4" rounded corners. Compatible router lifts and insert plates should match these dimensions.
Compatible with RTS05, RTS07, RTS013 O'SKOOL router lift & RTS02A router insert plate (sold separately)

Q: What are the electrical requirements for the included safety switch?

The included safety switch is designed for 120V tools only and features dual outlets for a router and dust collector with a combined maximum load of 15 amps, plus overload protection and a removable safety key.

Q: What accessories can be used with the T-tracks?

The universal fence T-track accepts 1/4" and 5/16" T-bolts as well as 1/4" hex bolts for mounting featherboards, stop blocks, router bit guards, hold-downs, and other compatible accessories.

Q: Does the router table support dust collection?

Yes. The fence includes an integrated 2-1/2" dust port for above-table chip collection and is compatible with the optional O'SKOOL DCC010 Router Dust Collection Box with a 4" dust hose adapter for below-table dust collection.

Q: How does the fence achieve precise adjustments?

Dual bearings provide smooth one-hand fence adjustment, while the Micro Adjuster offers 1/4" total travel, 0.05" movement per full turn, and 0.005" movement per graduation for fine fence adjustments.