Automatic Router Lift Systems for Porter Cable, Bosch, Dewalt, Craftsman 3-1/2" Diameter Router Motors.

• Applicable Models : . Aluminum Router Plate Dimensions are 11-3/4" X 9-1/4" X 3/8"thick, 19.1(3/4”) Radius. Designed for routers with 3-1⁄2-in.-dia of body.(Please check the size of our Router Lift to make sure if it matches your router motor and router table .(Multiple patents have already been applied for)
• The lift has three modes of operation for accurate and fast height adjustment. The first method is to press and hold the Continuous Ascending and Continuous Descending Buttons to raise or lower the lift until the desired height is reached.Turn the Encoder Knob to enter a travel value.Tap Micro Button for switching to the Micro-Adjustment Mode, when fine adjustment is needed. "Zero" the setting at any time. Over 3" of total travel. Precise movement to within 0.005".
• Suitable for a Variety of Router Tables: Use Cam wheels to adjust the gap between router table and router table top opening. Leveling screws can be adjusted the top and bottom flatness of the router plate and router table. The screws of oval mounting holes can be adjusted to suitable positions according to the locations of the router table style holes, then lock them in place.
• There are precise centerlines on both sides of the router plate that can help you find the center positions of the bit quickly and effectively. The 2-inch scale can help you adjust the fence quickly and effectively. These features make you spend less time setting up and more time routing.

• Accurate and fast height adjustment: An auto router lift is more accurate than a manual lift as it uses a motorized mechanism for precise adjustments.
• Precise movement to within 0.005": This product comes with a Micro-adjustment mode for precise movement within 0.005"
• Time-saving: Auto router lifts can save time by automating the height adjustment process.
• Easy to operate : Intuitive super control interface mode.
• 100% shipment inspection
• Each product is equipped with a traceability number for production , which facilitates inquiries related to the product.
• Automatic router lift systems includes : (5) Insert Rings(Sizes: 3/8”, 1”, 1-1/4”, 1-7/8”, 2-5/8”) , (1) Starting Pin , (1) Cam Wheel , (1) Carriage , (1) Insert Ring Wrench , (1)9-1/4” x 11-3/4” x 3/8” Router Insert plate , (1) Motor Control Unit , (1) Controller , (1)Adaptor , (1)Power Cord , (4)1/4” Screws , (2)Wood Screws , (1)3mm Allen Wrench , (1)4mm Allen Wrench
• Voltage: 110V-240V

Specification

• REST Button: nitializing Process _Process for the system to identify the mechanical range for Over 3" of total travel.
• MM/INCH Button: Measuring Unit Switch_Available for both Metric and Imperial (decimal/fraction mode) systems
• ZERO Button: Set up Zero Reference / Return to Zero Reference :"Zero" the setting at any time.
• Continuous Ascending And Continuous Descending Button:Press and hold the Continuous Ascending and Continuous Descending Buttons to raise or lower the lift until the desired height is reached.
• The touch screen is designed with glass material.
• It is a touch screen that is highly sensitive, allowing direct finger operation and providing an intuitive and user-friendly interface.
• The touch screen is a low-voltage device and poses no risk of electric leakage under normal use.
• Note: The touch screen is made of glass material, so accidental impacts or drops may cause damage. It is not recommended to use the touch screen in extreme environments with temperatures below -10 degrees Celsius or above 60 degrees Celsius as the touch screen sensors may become less responsive or lose sensitivity, resulting in malfunction.

Automatic Router Lift Installation

• Set Up A Router Plate:

1. Oval mounting hole: The screws of oval mounting holes can be adjusted to suitable positions according to the locations of the router table style holes, then lock them in place.
2. Cam wheels: Cam wheels can be used to adjust the gaps with the router table to prevent the router plate from vibrating.
3. Leveling screws: Leveling screws can be used to adjust the top and bottom flatness of the router plate and router table.

• Set Up Router Bit: When setting up and adjusting the router, you can make adjustments directly on the table without having to reach under the table, the router lift makes the adjustment quick and easy.
• Centerline Scale:

1. Centerline: that can help you find the center positions of the bit quickly and effectively. S
2. cale: The 2-inch scale can help you adjust the fence quickly and effectively.

• Clamp Block: The function of clamp block is to quickly clamp the router.(Be suitable for routers with 3-1⁄2-in.-dia of body.)