120V Wireless Transmitting and Receiving Electrical Outlet Switch for Dust Collection

• High-quality materials: UL certified American standard 3-pin AC power socket. UL Listed US Standard 14AWG Power Cord. The switch shell is made of PA-765 flame retardant material. Let you work more safely and reliably.
• The wireless transmitting and receiving switches are suitable for use with a variety of appliances such as vacuum, dust collector, power feed, work lamp, etc. The distance between the transmitting end and the receiving end can reach 160 feet without obstacles.
• The total current of the electrical appliances used with the switch at either end shall not exceed 15A during operation. Please note: If there are multiple transmitters in the same workshop at the same time, as long as any transmitter is started, the tools at the receiver will start.

O'SKOOL Wireless Transmitting and Receiving Electrical Outlet Switch for Dust Collection,433M Transmitter and Receivers, 120V Plug

• Saving Time and Improving Workshop Efficiency

The Wireless Vacuum Switch Transmitter can be used with a variety of power tools.

The vacuum switch transmitter needs to be used in conjunction with a receiver power outlet switch, allowing you to control your dust collector from anywhere in your workshop. You are spared the hassle of walking over to manually operate the dust collector.

• Standalone Voltage Outlets Offer Increased Safety

Standalone voltage outlets offer increased safety making them a great option for powering devices in a variety of settings.

• Creating a More Comfortable Work Environment

The Transmitting Port will send the wireless signal to turn on the Vacuum Port. After the work is done, turn off the tool of the Transmitting Port, and the vacuum will continue running for 5-10 seconds to clean the hose.

Using a Wireless Vacuum Switch can improve dust collection in the workshop, which can help create a healthier and more comfortable working environment.

Using the Wireless Electrical Outlet Switch is easy!!

Note: It is recommended

1. When there are plural Receivers and Transmitters within a perimeter of 650 feet, unintended interference may occur. Please avoid this situation.
2. When the dust collector/vacuum is connected to the Receiving Port, it cannot switch on. To turn it on, you will have to turn on the device connected to the Transmitting Port.
3. Avoid turning on and off the device connected to the Transmitting Port in a short period of time. If you have to do it,please give it a 5 seconds of time span.
4. The current of the power tool under the Transmitting Port has to be higher than 0.4 Amp, otherwise,the transmitting port won’t send out the “ON” signal to the receiving port.
5. The appliances rate for over 15 Amps should not be connected to this Wireless Vacuum Switching System.
6. For safety reasons, do not plug the power tool into the Receiving Port.
7. Metal objects may absorb and block the signal, causing inconsistent results in signal transmission. Please avoid placing large metal objects between the Transmitting and Receiving Ports. Changing the position and orientation of both switches can improve data reception when the receiving port does not respond properly.
8. The Wireless Electrical Outlet Switch transmitter can control the switch of the dust collector. When there are multiple Switches within the control distance, please confirm whether they all need to be turned on at the same time.

• Electrical specifications: 15A/120VAC/60Hz/1800W/2.4HP
• RF reception frequency: 433 MHz
• Maximum instantaneous current: 20 A
• Maximum instantaneous power: 2.4 HP