The O'SKOOL Precision Router Table Accessory Kit was carefully designed to address the everyday frustrations that woodworkers often face with traditional setups.From the parallelogram fence mechanism to built-in dust collection and precision stop blocks, every upgrade in this accessory kit contributes to repeatable performance and dependable safety.And it maintains the flexibility to work with your choice of router lift or insert plate.
Most fences slide along two rails or grooves. Unfortunately, these tracks can introduce subtle shifts during movement, especially if you're manually pushing the fence into position. These minor misalignments can add up and create major issues over time. O'SKOOL's parallelogram design solves this completely.
Instead of sliding loosely, the fence travels along a guided parallelogram path. As you move it closer or farther from the bit, it stays perfectly parallel to the edge of the table. This small design change delivers big advantages.
Your scale reference will always align with the center of the router bit, no matter how far the fence is adjusted. There's no need to recalibrate after each change. You save time, increase precision, and reduce the chances of error.
One of the biggest strengths of the parallelogram system is that it preserves your setup exactly as you left it. If you're making repeated cuts or returning to a project later, being able to dial in the exact same position without guesswork is a huge time-saver.
Routing is not always about pushing material all the way through. Sometimes you need to make accurate, partial cuts, like mortises or non-through dados. The calibrated stop blocks let you clearly define where your cut begins and ends.
Set the blocks and you have physical boundaries that prevent over-travel and ensure consistent results. Your router bit will only cut where you want it to.
When routing mortises, you need to start and stop with precision. Freehand methods rarely achieve the accuracy needed. These stop blocks make it possible to replicate your cuts again and again with machine-like precision.
This also applies to non-through dados, which are commonly used in shelving and cabinet construction. With the stop blocks in place, you'll complete clean, repeatable cuts without the risk of overshooting.
Each stop block is equipped with a hairline acrylic indexing plate. While this might seem like a minor feature, it makes a significant difference. The fine lines help you align with total clarity and confidence.
Whether you're new to woodworking or a seasoned pro, this kind of visibility removes the need for guesswork. Just line it up, lock it down, and go.
A standout feature of this kit is the freedom it gives you when choosing an insert. Many router tables force you to use proprietary plates, but O'SKOOL does not include one by default. This lets you select the insert that best fits your tools and workflow.
Whether you want the convenience of a router lift or prefer the simplicity of a standard plate, this kit supports both options. It's ideal for woodworkers who want room to grow without being locked into one setup.
No insert plate is included, giving you the flexibility to install what works best for you. The system supports O'SKOOL's own router lift and insert plates such as RTS02A, RTS07, RTS05, and RTS013. Whether you're working on furniture, joinery, or cabinetry, this table can adapt to your evolving needs.
O'SKOOL addresses dust and debris with a built-in 2.5-inch dust port. It connects easily to most standard shop vacs and dust collectors.
Located right behind the bit area, the port captures most of the chips and fine dust before they can spread. This not only keeps your work area cleaner but also protects your lungs and improves visibility during cutting.
The integrated router bit guard and dust shield serve as an extra layer of safety. The clear shield allows you to monitor your work while keeping flying chips away from your face and eyes.
It's an essential feature for safe operation. Since it's built into the fence, there's no need to install separate parts or deal with clumsy attachments.
Feather boards act like extra sets of hands, keeping your material securely in place. This kit includes two boards that mount into the top slot of the fence. One applies side pressure, while the other holds the material down flat.
This setup minimizes kickback and ensures smooth, even feed. It's especially helpful for longer boards and narrower stock. Whether you're routing edges or using a plunge technique, the boards improve both safety and accuracy.
The tabletop measures 31-5/8 inches by 23-3/4 inches and is 1-7/16 inches thick. Made from durable MDF, the surface stays flat and rigid under pressure, resisting warping over time.
Its generous size makes it easy to maneuver large workpieces. Whether you're trimming cabinet doors or cutting complex profiles, you'll have room to work with confidence.
The integrated combo T-track allows you to use a wide range of accessories including jigs, stops, and miter bar fixtures. This adds flexibility for custom setups and makes your workflow more efficient.
The steel stand is built from rectangular tubing and offers outstanding strength. It supports both the router table and your workpieces without flexing or wobbling.
Workshops rarely have perfectly level floors. Each leg of the stand features adjustable levelers, making it easy to balance the setup on any surface, whether concrete, wood, or tile.
Standing at 36 inches tall, the table offers an ergonomic height for most users. It helps reduce strain on your back and gives you better control over your routing tasks. Its footprint of 28-1/8 inches by 20-1/8 inches also fits comfortably in smaller shops.
This table is accessible for beginners thanks to its clear markings and user-friendly features. At the same time, professionals will appreciate the durable construction, precision controls, and advanced compatibility.
From the thick MDF tabletop to the steel stand and aluminum components, this kit is built for longevity. Even the indexing plates and feather boards are made from rugged materials designed to withstand regular use.
This isn't a kit you'll outgrow or need to replace soon. It's an investment in your craft and your shop.
From Joinery to Edge Profiling. The O'SKOOL router table is suited for a wide range of woodworking applications, including:
Whether you're building furniture, installing cabinetry, or creating custom parts, this table delivers the control and consistency needed for professional-grade results.
A1: The 2.5-inch port combined with the clear bit guard captures most debris, keeping the workspace clean and reducing airborne dust.
A2: Yes. While it's sturdy, it's not overly heavy. Optional casters can also be added for greater mobility.
A3: No, the kit does not include a lift, but it supports both router lifts and standard insert plates, giving you full control over your setup.
A4: Definitely. Its clear indexing, stable base, and user-friendly adjustments make it great for learning while still offering the precision pros expect.
A5: The system is compatible with O'SKOOL’s own router lift and insert plates, including models RTS02A, RTS07, RTS05, and RTS013.
| Brand | O'SKOOL |
|---|---|
| Item model number | RTS022 |
| Item Weight | 56.2 pounds |
| Package Dimensions | 36.2 x 27.5x 7.16 inches |
| Includes | (1) MDF Table Top (1) Dust Port (2) Feather Board (1) Router Bit Guard (1) Router Table Fence System (2) Stop Blocks (1) Steel Stand |
