Adjustable-Temperature Edge Banding and Sealing Iron - VL01
Description
Adjustable Heat for Edge Banding
Set the temperature between 100°C and 220°C (212°F–428°F). Use the iron sock and stand as directed in the instructions, and test the setting on a sample of your covering material before continuing.
Check Your Setup
Use a suitable 110V AC supply. Check the adhesive or covering manufacturer’s temperature instructions, and allow the iron to cool before storage.
How to use the O'SKOOL Display Veneer Edge Banding Sealing Iron
1. Fit the iron sock over the shoe as directed in the instructions.
2. Place the iron on its metal stand on a suitable heat-resistant surface, following the supplied instructions.
3. Connect the iron to a suitable 110V AC outlet.
4. Press ON/OFF to begin heating. Use the temperature buttons to choose a setting from 100°C to 220°C (212°F–428°F).
5. To change between °C and °F, hold the ON/OFF and °C/°F button for about 3 seconds, following the supplied instructions.
6. Wait until the iron reaches the selected temperature before use.
7. Check that the iron sock is fitted. Test the temperature on a sample of the covering material and follow its application instructions before continuing.
Specification
| Material | PTFE+TPR |
| Brand | O'SKOOL |
| Item Dimensions LxWxH | 14.96 x 3.42 x 2.36 inches |
